Axminster AT1628VS Spécifications télécharger pdf (Page 5)

Code 502703

Model AT1628VS

Rating Trade

Power 230V 50Hz 1.5kW

Speed Low 0-1,600rpm High 300-3,750rpm

Spindle Taper MT2

Spindle Thread M33x3.5mm (Ref T38)

Taper Tailstock MT2

Distance Between Centres 700mm

Max Diameter Over Bed 203mm

Overall L x W x H 1115 x 450 x 460mm

Weight 96kg

Speciﬁcation

Speciﬁc Safety Instructions for Woodturning Lathes

1. Do not use ‘split’ work pieces.

2. Always start at the lowest speed when starting a

new task.

3. Check that the tool rest is at or slightly below the

centre line of the workpiece.

4. Check the workpiece is securely mounted in the

lathe before switching on the power.

5. Rotate the workpiece by hand, to check that it

is centralised, clear of the tool rest, not ‘split’ or has

loose knots.

6. Where lathes have the facility to be reversed; check

the machine is rotating in the correct direction.

7. If your lathe has the facility to run in reverse, you

must ensure that the mounting accessories (chucks,

faceplates etc.,) can be ‘locked’ onto the lathe

mandrel, and in the case of chucks have some form

of security device to prevent them ‘unwinding’ during

reverse operation.

8. Make sure your tools are stored/racked away from

the turning area of the lathe. Do not reach over a

rotating workpiece at any time.

9. Do not ‘dig in’ or try to take too large a cut.

10. Do not leave the lathe running unattended; or

leave the machine until everything is stopped.

11. Some turning tools may have speciﬁc sharpening

angles that have been determined by the

manufacturers; when re-sharpening, adhere to these

angles to maximise the ﬁnish of your work.

1 2 3 4 5 6 7 8 9 10 ... 23 24

Pas de commentaire

Axminster AT1628VS Spécifications Page 5