Axminster AWFS18 Instructions d'exploitation télécharger pdf (Page 18)

Changing the Blade

Changing Standard Blades:

DISCONNECT THE SAW FROM THE MAINS SUPPLY

1. Lift up the blade guard (A) and push down the lower guard (B) (beneath the table).

2. Remove the table insert (C).

3. Loosen the tensioning knob (D).

4. Pull the tensioning lever (E) forwards.

5. Loosen the blade clamping knob (F).

6. Press down on the rocker arm and remove the upper blade clamp, from it’s cradle (G).

7. Press down the lower housing clip (H)(beneath the table) and remove the lower blade clamp.

8. REMOVE the blade assembly, through the hole in the table.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Axminster AWFS18 Instructions d'exploitation Page 18