Axminster T-2000CK Instructions d'exploitation télécharger pdf (Page 10)

Assembly

4. Locate the two long and short cross support brackets

(4-5). Line up the pre-drilled holes in one of the cross

support brackets with the pre-drilled holes to the front

face of the lower leg support tubes (3). Secure using four

button head bolts (e), see ﬁ g 08. Repeat for the

remaining cross support brackets, see ﬁ g 09-10.

5. Locate the four castor wheels (21). Screw each castor

into the threaded holes on top of legs (3), using the

supplied spanner (26), tighten the nut at the base of each

castor to lock the assembly in position, see ﬁ g 11-12.

Fig 11-12

6. Locate the extraction drum (7) and the No: 10 ANC

Hex screws (d). Position the drum on top of the motor fan

assembly (1), there are arrow marker labels on each unit,

line up these labels and secure the drum (7) to the motor

assembly (1) using the Hex screws (d), see 13-14-15.

Fig 13-14-15

Fig 08-09-10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Pas de commentaire

Axminster T-2000CK Instructions d'exploitation Page 10