Axminster AWSL Manuel d'instructions télécharger pdf (Page 5)

Specific Safety Instructions for Woodturning Lathes

Specification

Initial Assembly

9. Make sure your tools are stored/racked away from the turning area of the lathe. Do not reach

over a rotating workpiece at any time.

10. Do not ‘dig in’ or try to take too large a cut.

11. Do not leave the lathe running unattended; or leave the machine until everything is stopped.

12. If you are turning between centres with ‘softish stuff’, check and reposition the tailstock

centre frequently.

13. Some turning tools may have specific sharpening angles that have been determined by the

manufacturers; when re-sharpening, adhere to these angles to maximise the finish of your work.

Before commencing assembly, please read the parts description & identification so that you can

readily identify the parts. Remove the lathe from its packaging. Stand it on the bench. Loosen the

banjo lock and reposition to the required position, similarly with the tool rest.

Locate the handle for the tailstock control wheel and screw securely into the pre-threaded hole in

the wheel rim flange, using a flat blade screwdriver. If you are going to fit the optional bed

extension, follow the instructions that are in the box or see page 06.

Model AWSL

Product Code 501245

Rating Hobby

Power 375W

Speed (5) 760-3,200rpm

Spindle Taper 2MT

Spindle Thread 1” x 8tpi (Ref T04M)

Taper Tailstock 2MT

Distance Between Centres 440mm(17”),

965mm (38”) with extension

Max Diameter over Bed 240mm

Overall L x W x H 865 x 205 x 365mm

Weight 38kg

1 2 3 4 5 6 7 8 9 10 ... 15 16

Pas de commentaire

Axminster AWSL Manuel d'instructions Page 5