Axminster AW1416VS Spécifications télécharger pdf (Page 13)

Maintenance

Daily after use

•Clean wood shavings away from the lathe bed and

tool rest.

•Smear a light coat of wax (Protec Tool Wax Polish,

Order no. 211835 ) over the lathe bed to allow

the Banjo and Tailstock to run more smoothly over

the bed and to prevent corrosion.

•Check the tension of the belt and adjust, (See pages

11 & 12 for Changing the Belt Speed).

•Check any build up of wood shaving on the motor

and spindle pulley’s and clean if necessarily.

• Using an airline, blow out the motor’s air vent.

Monthly

Note: If the lathe is not going to be used for a period of time, smear a light

coat of wax over the bed and place a dust sheet (product code. 600410), over the

lathe.

Wax Points

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Axminster AW1416VS Spécifications Page 13